Elite Interior Emulsion

ELITE INTERIOR EMULSION

 

Thinning and Clean Up : Portable Water
Uses : Interior Walls
Finish : Smooth & Matt
Application : By Brush roller or spray
Covering Capicity : 8 – 10 sq. mtr. per litre per coat with 1 litre of Elite Acrylic Emulsion 650 ml. of water
Drying time : 2 – 4 hours ( Recoatable after 4 hours )
Colour Range : White or any other shade on request
Packing : 1 litre, 4 litre, 10 litre, 20 litre
Highlights : Economy interior Plastic Emulsion
Shelf Life : 24 months from the Date of Manufacture
Undercoats : Cement Primer 1001
Application Areas : On all type of walls ( Cementous, asbestos & brickworks)

 

Directions For Use:

Cleaning: Sand the surface with emery paper to remove loose particles, dust, grease and cracked flaked paint. Wipe clean.

Primer: Apply one coat of Glossy Paints Wall Primer (WT / ST). Allow drying for 6-8 hours. Sand with emery Paper. Wipe Clean.

Putty: Smoothen the surface by filling dents with thin coats of Glossy Paints Acrylic Wall Putty or Glossy Paints White Stiff Paint mixed with Glossy Paint 1001 clear varnish.

Primer: Apply another coat of Glossy Paints Wall Primer (WT / ST). Allow Drying for 6-8 hours. Sand with emery Paper. Wipe clean.

Topcoat: Thin one litre Glossy Paints Elite Emulsion upto a maximum of 400-500ml of water. Do not over thin. For best results apply 2 coats of Glossy Paints Elite Emulsion.

Maintenance Tips: For removing stains, clean the surface using a sponge with a mild soap solution. Wipe the surface clean. Ensure a drying time of 1 week before cleaning.

 

Safety, Health and Environment Information

  • Store container in upright position, with lid tightly closed in a cool, dry place
  • Keep out of reach of children and away from food, drink and animal feed.
  • May be Harmful if swallowed. In case of ingestion seek immediate medical attention.
  • Ensure good ventilation at all times.
  • Do not breathe vapour of spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation.
  • Wear eye protection during application. In case of contact with eyes rinse immediately with plenty of water and seek medical advice.
  • Remove splashes from skin with soap and water or a recognized skin cleanser.
  • Do not pour leftover paint down the drain or in water courses.
  • In the event of spills, contain spillage using sand or earth.
  • Safety Data Seat available for professional users on request.
  • No added Lead, Mercury or Chromium compounds.