Elite Epoxy Finish Paint system is supplied in two separate containers, namely Base and Hardener in the ratio of 3:1 by volume. Wait for 10 – 15 minutes as flash off time before applying the coating. If required, add spl. Epoxy Reducer 0682T in the mixed material up to 10% before use. Care is to be taken that the mixed material is to be consumed within 3-4 hours. Mixed material has got limited pot life of 4 hours. Application of Primer should be followed with a coat of Elite Epoxy Finishing Paint (2 Pack).
Few characteristic are cited below:-
| 1. Consistency : | Smooth and Uniform |
| 2. Viscosity at 30 C B/4 Cup. : | 60 – 90 Seconds |
| 3. Covering Capacity as per IS: 101. : | 8 to 10 Sq. Mts. Per liter (DFT 30 Microns)Dry film Thickness. |
| 4. Drying Time of mixed material( Base + Hardener )a) S.D. : b) H.D. : c) T.F. : | 2-4 Hrs. 6 – 8 Hrs. Overnight |
| 5. Finish : | Full Gloss, Semi Gloss and Egg-Shell to Matt |
| 6. Weight per litre in Kg. : | 0.93 to 1.2 + 0.5.(Depending on shade required) |
| 7. Method Of Application : By spray, curtail or brush ( If there is appreciable drags on brush, add more epoxy Reducer for better application) | |
| 8. Shelf life. : | Minimum one year after date of manufacture(In separate sealed containers) |
Recommended for use on steel structures, truck bodies, bridges, interior and exterior of storage tanks, bulk handling equipment, pipelines, metal surfaces as well as other Installations exposed to saline and highly corrosive environments.
ELITE EPOXY PAINT ST (2 Pack)
Applications: Metal, Mild Steel Surfaces; Ratio 3:1
CLEAR
Golden Yellow, White, Signal Red, Deep Orange, Havoc, PO Red, Battleship Grey, AD Grey, DK Grey, Light Grey, Phirozi, Cascade Green, Bus Green, Jade Green, Golden Brown, Brown, Munshell Blue, Sky Blue, Smoke Grey, Black, Matt Grey, Petal, Pale Rose, Dawn Glow, Cherry, Wild Purple, Magenta, Any RAL Shade, All other shades