Type :

Single pack

Composition :

Black pigments in silicones

Temperature Resistance :

Up to 600^oC

Theoretical Coverage :

15 Sq. mtr. per litre with 25-35 microns DFT

Drying Time :

Touch Dry –      1 Hr.

Hard Dry   –   4-6 Hrs.

Tack free   –   Over Night

This special coating is first subjected to temperature raging between 150 – 180ºC for one hour before handling or stocking for better and lasting finish.

Afterwards, the coated surface / objects may raise temperature slowly up to 600ºC for one hour in case of lab testing.

Recoating :

After 30 minutes Flash off in air, bake the same at 180 – 220ºC for 1 hour

Colour :

Egg Shell Black (Also available in Grey/Silver)

Flash Point :

Above 25^oC

Storage Life :

Six months in original sealed container

Application :

By brush or spray

Finish :

Smooth and Egg Shell Black

Solvent Reducer :

Glossy Reducer 014HSGT

Surface Preparation :

Surface should be cleaned and rust free.

Preferably use blast cleaning or alternatively do manual cleaning. Generally priming is not required but for corrosive atmosphere and temperature upto to 600°C.

Undercoat :

Special Heat Resistant Primer may be used as needed.

Over Coat :

Minimum two coats are recommended for better performance

End Users :

Exhaust, manifolds, boiler doors, smokestacks electrical equipments, Auto headlights, Aerosols, Metal Surfaces, Silencers, Machinery, Heavy Equipment etc.

Packing :

1 Ltr, 4 Ltr, 20 Ltr

Mixing Instructions :

Mix well before use.

Application Conditions :

As dictated by normal good painting practice.

In confined spaces, provide adequate ventilation during application and drying.

Health and Safety :

Applicator should wear a mask during paint application.