DIRECTIONS :   The surface to be painted should free from dust, oil, grease etc. Mix the base and Hardener in the ratio of  3:1 by volume (750ml of Base and of 250ml of Hardener makes 1 litre) and allow it to mature for 10-15 minutes. Apply a coat of the suitable 1001 Epoxy Zinc Phosphate Primer 16% and allow it to dry for 6-8 hours. Then apply 2 coats of the 1001 Epoxy Paint, 1001 PU paint or 1001 CR based paint giving an interval of 6-8 hours between each coat.

Use 1001 Epoxy Thinner for thinning.

Description :

A two-pack anti-corrosive epoxy ZP primer for use on steel surfaces, It is designed to offer superior performance in highly corrosive chemical and coastal environments. It can be overcoated with epoxy, chlororubber and polyurethane top coats. Apart from a history of success in refineries, fertilizer, chemical and other plants, it can also be applied on tank exteriors, equipment, pipelines, structural steel, mild steel, metal surfaces etc.

Thinning :

1001 Epoxy Thinner 0682T only

Uses :

All metallic & non-metallic surface.

Finish :

Low sheen

Application :

By Spray Only

Covering Capacity :

16-19 square metres per litre with 30-35 DFT micron

Drying Time :

Touch dry : 1 hour,  Dry to handle : 4 hours,  Hard dry : Overnight

Color Range :

White/Grey/Red Oxide

Packing :

1, 4 & 20 litres

Highlights :

Consume mixed material within 4 hours

Shelf Life :

12 Months

Flash Point :

Above 25°C

Undercoats :

Self.

Application Areas :

On all metallic surfaces.