1001 FLOOR COATINGS WT

1001 Water Thinnable Floor Paint is suitable for the protection of concrete floors.
It is acrylic based and is easy to apply, has longer life, and is more durable.
Name: 1001 Floor Coating WT
Shades: Golden Yellow, Signal Red, Special Signal Red, Terracotta 0427, Any shade on request
Pack size: 20 L, 10 L, 4 L, 1 L

ELITE FLOOR PAINTS WATER BASED

Elite 1001 Floor Paint is specially made to beautify the outdoor floor tiles, and protect them from any fungal growth.
It can be applied to outdoor floor tiles, paver blocks, cement tiles in driveways and walkways.
It has a blend based on polyurethane and acrylic polymers which produces systems with outstanding abrasion, impact and chemical resistance coupled with high degree of flexibility.
Its micro-porous allowing the substrate to breathe, unlike solvent based systems.
It is produced to a silk sheen for maximizing light reflectivity whilst retaining easy to clean, non slip characteristics and reduction of glare.
Adhesion to sub floor is not affected due to moisture, as it is a breathable water based system unlike its counterpart solvent based systems and is available in different shades.

SURFACE PREPARATION & APPLICATION

Step 1: Remove all dirt, grease, oil, loose gravel and foreign matters with high pressure wash for better bonding.
Step 2: Apply a Glossy 1001 Floor Primer coat of floor coat by diluting with 10-15% water.
Step 3: Mix Floor coat thoroughly with a flat paddle before and during the use.
Step 4: Apply 2-3 coats of floor coat directly (remember the previous coat should be dried before applying the next coat).
Complete drying time is 48-72 hours depending upon weather conditions.